In the course i am updating/ renewing, i keep running into
a problem. Some existing verts have many rays coming out of them.
Some verts cannot be deleted. This causes problems in seam-blending
or creating a shape. adding verts etc. Can anything be done?
Thanks
Doug
Verts with many rays.
Re: Verts with many rays.
You'll get plenty of help with this, but let me start. The "rays" are "edges", and appear as straight lines. The verts you mentioned can probably be deleted, but it will require some manipulation. These Lez Marwick Lessons will provide some valuable information, and he explains it well.
Episode 11. Turning edges http://youtu.be/3bmOOjgGLj0
Episode 12. Adding verts http://youtu.be/QlzH7Ogo5i0
Episode 13. Deleting verts and repairing mesh http://youtu.be/lxUDZMEeF8U
The entire set of Lessons is available here at LinksCorner.org.
Pete
Episode 11. Turning edges http://youtu.be/3bmOOjgGLj0
Episode 12. Adding verts http://youtu.be/QlzH7Ogo5i0
Episode 13. Deleting verts and repairing mesh http://youtu.be/lxUDZMEeF8U
The entire set of Lessons is available here at LinksCorner.org.
Pete
-
- Posts: 9
- Joined: September 23rd, 2021, 6:02 pm
Re: Verts with many rays.
Thanks Pete, the tutorials were
Great. I learned quite a bit.
Doug
Great. I learned quite a bit.
Doug